View AT1830I-256_384479.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AT1830 Mustang
1.8" IDE Solid State Drive
* * * * * * * * * * *
64Mbyte to 8 Gbyte uncompressed capacity Full -40oC to +85oC industrial temperature range Compact 1.8" drive form factor with 44 pin, 2mm IDE interface 32-bit ECC for exceptional data reliability 3.3 to 5 volt, low power operation Completely solid state - no moving parts 1000G operating shock 15G operating vibration 4.0 Mbyte/sec sustained Read throughput 3.5 Mbyte/sec sustained Write throughput 10 year data integrity
The AT1830 Mustang is the largest capacity 1.8" IDE drive available today. With a current maximum capacity of 8 Gbyte in an extremely compact 1.8" drive form-factor, it delivers exceptional value for its features. Future capacity, as new, higher capacity NAND EEPROM become available, is 16 Gbytes. It is completely solid state, with no moving parts. This contributes to the unit's exceptional ruggedness and wide operating temperature range; with no moving parts, there is no mechanism for mechanical wearout. Being 100% IDE compatible, no special drivers or flash file managers are required. It is a virtual drop in replacement for standard rotating media. The AT1830 employs sector erasable NAND E2PROMs (Flash) to deliver up to 8 Gbytes of uncompressed, non-volatile solid state storage in an extremely small, rugged form factor. Raw data throughput is fast at a sustained 4.0 Mbytes per seconds for reads and 3.5 Mbytes/second for writes. The drive is implemented using a custom IDE Flash controller with an integrated error detection and correction mechanism and proprietary remapping and wear-leveling technology to greatly improve data reliability. It's small form factor and low-power operation make the AT1830 ideal for hand-held, portable or embedded applications requiring up to 8 Gbytes of data storage. Advanced PIO modes and multi sector transfer modes are supported, as well as LBA addressing. The drive is available in a number of standard capacities from 64 Mbytes to 8 Gbytes. Please contact the factory for specific size availability.
2107 N. First Street, Suite 415 San Jose, CA 95131 http://www.memtech.com phone (408) 452-1277 toll free (800) 445-5511 fax (408) 452-7936
Ver 1.1
Bottom View
2.000 1.940
Each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions. The Mustang may be mounted in any orientation. Four mounting holes with an internal diameter of 0.065" are available. External standoffs may be required for proper mounting of the drive.
0.060 0.065" x4 l 3.000 2.940 0.300 0.000 0.000 0.340 0.000
SPECIFICATIONS*
Interface ATA Compatibility IDE Drive Number Current Capacity Physical Capacity Physical Sector Size Performance Random Seek Read Transfer Rate Write Transfer Rate BIOS Setup X3T10 2008D, Rev. 6 Drive 0 or 1 2 Gbytes 16 Gbytes 512 bytes Reliability Endurance 8Kbytes/30 sec Error Rate ECC Application Specific 3.2 million hours <1 in 1015 bits read 24-bit
0.4mS 4.0 Mbytes/sec sustained 3.5 Mbytes/sec sustained PIO Mode 4, no DMA
Power Requirements Voltage 5V +/- 5% Current (rms) AT1830-1024 Sleep 5 mA Read 30 mA Write 35 mA Peak 150 mA Mechanical Length Width Height Cable Interface Max. Cable Length Rec. Cable Length Weight (128 Mbytes) (2 Gbytes)
Environmental Operating Temperature Range Commercial 0o to +70oC Extended -20o to +75oC Industrial -40o to +85oC Storage Temperature -55o to +125oC Shock - operating 1000G, 0.5ms, half sine Vibration - operating 15G Random, 5-2000Hz Airflow None required Humidity 5% to 95% NC Safety CSA File LR114427 EMC EN55022 and EN50082-1
3.00 inches (76.2mm) 2.00 inches (50.8 mm) 0.34 inches (8.6mm) 44-pin, 2mm 18 inches (457 mm) 12 inches (305 mm) 1.0 oz (28 g) 1.3 oz (37 g)
*Specifications subject to change without notice.
AT1830 Data Sheet
Version 1.1
4/10/2006

▲Up To Search▲

Price & Availability of AT1830I-256

	To Download AT1830I-256 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .